Description

LigoWave DLB 5 PTP & PTMP Outdoor Access Point (Radio)

LigoWave’s DLB 5 is a versatile, very efficient, and stable 5 GHz access point. This product is equipped with an extreme output power (up to 29 dBm) 802.11n MIMO radio wrapped securely inside a robust enclosure. The two N-type connectors allow the connection of external antennas suited for a wide range of applications. The powerful radio core is coupled with an advanced and feature-rich operating system, optimized for high-performance wireless communications while optionally allowing compatibility with older 802.11a standard devices. The smart dynamic polling-based protocol (iPoll 2) ensures reliable communication even in congested areas with 64 client devices connected to the base-station.

Equipped with LigoWave’s dual firmware image feature, remote software upgrades are assured even if a power failure interrupts the process. The device will restart using the prior firmware in the event of an upgrade failure.

The enclosure is made of polycarbonate plastic with UV inhibitors to provide years of outdoor exposure in direct sunlight without cracking. The DLB 5 was designed and tested to meet an IP-67 rating as well as vibration, temperature, drop, salt, fog, and electrical surge standards to ensure a high level of reliability unsurpassed in the industry. It is equipped with a grounding plug and a grounded 24-volt PoE to allow a professional installation, resistant to electrical surges.

 

DLB5 OS

The DLB OS is a highly functional and easy-to-use operating system. This powerful and flexible operating system ensures flawless operation of all DLB hardware devices and effortless setup for those deploying the networks.
• Smart polling data transmission protocol (iPoll 2)
• Dual-firmware image support
• Responsive HTML 5 based GUI
• 170 Mbps capacity
• 80,000 PPS rate
• IPv6 support
• Infinity Controller compatible

 

Infinity Controller

The Infinity Controller is LigoWave’s proprietary element management system that facilitates network installation, configuration, control, maintenance, monitoring, and expansion.
The Infinity Controller is designed to work with all Infinity (NFT), LigoDLB, and LigoPTP NEs. It offers full functionality with the Infinity and LigoDLB series but supports only the monitoring feature for LigoPTP NEs. The LigoPTP configuration scenario is currently undergoing development.

LigoWave DLB5 Specifications

 

Product/ distance recommendation;	PTMP mode:	PTP mode	PTP mode (full capacity)
DLB 5	Antenna dependent	Antenna dependent	Antenna dependent

 

 

Wireless

WLAN standard :	IEEE 802.11 a/n, iPoll (proprietary)
Radio mode :	MIMO 2×2
Radiofrequency band :	5.150 – 5.850 GHz (FCC 5.150 – 5.250 and 5.725 – 5.850 GHz)
Transmit power :	Up to 29 dBm (country dependent)
Receive sensitivity :	Varying between -97 and -75 dBm depending on the modulation
Channel size :	5, 10, 20, 40 MHz
Modulation schemes :	802.11 a/n: OFDM (64-QAM, 16-QAM, QPSK, BPSK)
Data rates 802.11n :	300, 270, 240, 180, 120, 90, 60, 30 Mbps
802.11a :	54, 48, 36, 24, 18, 12, 9, 6 Mbps
Error correction :	FEC, Selective ARQ
Duplexing scheme :	Time-division duplex

 

 

Antenna

Antenna Type :	External N-connectors
Antenna Gain :	Antenna dependent

 

 

Wired

Interface :

10/100 Base-T, RJ45

 

 

Software

Wireless operating modes :	Access point (auto WDS), access point (iPoll 2), station (WDS, iPoll 2), station (ARP NAT)
Wireless techniques :	Smart station polling, smart auto-channel, adaptive auto modulation, automatic transmit power control (ATPC)
Wireless security :	WPA/WPA2 Personal, WPA/WPA2 enterprise, WACL, user isolation
Wireless QoS :	4 queues prioritization on iPoll 2
Network operating modes :	Bridge, Router iPv4, Router IPv6
Network techniques :	Routing with and without NAT, VLAN
WAN protocols :	Static IP, DHCP client, PPPoE client
Services :	DHCP server, SNMP server, NTP client, router advertisement daemon, ping
Management :	HTTP(S) GUI, SSH, SNMP read, Infinity Controller, Telnet
Tools :	Site survey, link test, antenna alignment

 

 

Physical

Dimensions :	Length 150 mm (5.9 ‘’), width 115 mm (4.5 ‘’), height 55 mm (2.1 ‘’)
Weight :	450 g (16.2 oz)
Mounting :	Combination wall/pole mount with quick-swap bracket included

 

 

Power

Power supply :	12 – 24 VDC passive PoE (24 V passive PoE adapter is included in the package)
Power source :	100 – 240 VAC
Power consumption :	(max) 4.5 W

 

 

Environmental

Operating temperature :	-40°C (-40 F) ~ +65°C (+149 F)
Humidity :	0 ~ 90 % (non-condensing)

 

 

Management

System monitoring :	SNMP v3, Syslog, Web UI, and Infinity Controller
Configuration :	WebUI, Infinity Controller

 

 

Regulatory

Certification :

FCC/IC/CE